uaCSTA TAPI for Mitel Phones:
Mitel 68x series
- Mitel 6863i
- Mitel 6865i
- Mitel 6867i
- Mitel 6869i
In addition to the web interface, Mitel phones must also be provisioned via a configuration file. In the
The following settings must be made in the configuration file: :
csta: 1csta proxy: DNS-Name or IP- address of the telephone interface in uaCSTA Server for SIP Phones. example: uaCSTAServer.mydomain.com csta port: Port of the telephone interface in uaCSTA Server for SIP Phones. example: 5060 csta password: The password stored in the uaCSTA Server for SIP Phones Administrator under Telephone connection Contents of a sample file : csta: 1 csta proxy: uaCSTAServer.mydomain.com csta port: 5060 csta password: password
Create a file with the appropriate content as startup.cfg in ASCII format. Place this file in an FTP, TFTP, HTTP(s) server in the root directory from . z.B.: Pumpkin TFTP server
- Open the website of the . phone
- Advanced Settings - Global SIP:
- Transport Protocol: UDP and TCP
- Configuration Server:
- Enter the access data for the FTP, TFTP, HTTP(s) server
- Save the settings
- Operation - Reset:
- Restart Phone - restart the phone
Check that the phone has correctly applied the settings :
- Advanced Settings - Troubleshooting:
- Advanced Settings - Troubleshooting:
- Get server.cfg
- The settings contained in startup.cfg must be visible in the delivered file
Settings for a Mitel 68 firmware version 4.1.0.2033 - February 2017